Are you unable to connect to the Linksyssmartwifi network? Well, that means no internet. This is one of the most common yet major problems that every Linksys smart WiFi user bumps into. But you need not to worry! We’ve got you covered! In this post, we assure you that we will help you overcome this annoying issue in no time. Let’s hit the nail on the head!
Update the Firmware of Your Linksys Smart WiFi
First things first, verify whether you are using an upgraded version of firmware on your Linksys smart WiFi or not. On the off chance, if you are using an old or outdated version of firmware on your Linksys smart WiFi, you will surely experience this issue. Therefore, to get rid of it, it is very important to update the firmware of your Linksys WiFi smart WiFi (whenever available). You can easily update the firmware by navigating to its web-based setup page via linksyssmartWiFi.com or 192.168.1.1 IP.
Power Cycle Your Linksys Smart WiFi
Yes, you read it right! Sometimes, a simple reboot, restart, or power cycle is enough to get issues with your Linksys WiFi smart WiFi fixed. To initiate the process, follow the step-by-step instructions listed below:
Step 1: Unplug your Linksys smart WiFi and wait for some time.
Step 2: Thereafter, plug your Linksys smart WiFi back in.
Step 3: Ensure to choose a wall socket for your Linksys smart WiFi that is near to your existing modem.
Step 4: After plugging in your Linksys smart WiFi, wait for the power LED to become stable.
Once done, connect your device to the Linksys smart WiFi’s network and try to access the Linksys Smart WiFi Login page. If you are still facing issues then move to the next step.
Ensure that the Password of the WiFi Network is Correct
Bear in mind that you can only connect to Linksys smart WiFi’s network only if you are using the correct password (network key or passphrase). So, we recommend you enter the password correctly in order to fix the “unable to connect to Linksys smart WiFi network” issue. If you are using the correct password and still not able to use the internet, then the possibility that there might be an issue with your Linksys smart WiFi.
To resolve this issue, make sure that your Linksys smart WiFi isn’t catching signal interference from neighboring WiFi devices. For this, you have to place your Linksys smart WiFi away from corners, doors, and windows. Moreover, ensure to place your Linksys smart Wi-Fi outside the cabinet and above the table.
If the “unable to connect to Linksys smart WiFi network” issue continues to appear, then reset your device.
How to Reset Your Linksys Smart WiFi?
Here’s how to reset Linksys smart WiFi:
- Right off the bat, ensure to provide a steady and fluctuation-free power supply to your Linksys smart WiFi.
- Make sure to disconnect your Linksys smart WiFi from all the connected devices.
- Then, you have to locate the reset hole on your Linksys WiFi range smart WiFi.
- After that, grab a pin, paper clip, or any similar object and insert it carefully into the Linksys smart WiFi reset hole.
- Hold the reset hole for a few seconds and then release it.
- That’s it! Now, you have to perform the Linksys smart WiFi setup process again after the reset process.
Access the Linksys smart WiFi login page via 192.168.1.1IP and make sure that your Linksys smart WiFi settings are properly configured.
These were the fixes that you can apply to fix the “unable to connect to Linksys smart WiFi network” issue. We hope that you can easily resolve the issue in a trouble-free way.